Contact Us

22 Heussler Terrace
Milton QLD 4064
Get Directions

[email protected]

Adelaide: (08) 7221 2202
Melbourne: (03) 9038 8545
Perth: (08) 6363 5517
Sydney: (02) 8004 1626

Free Shipping Ozwide on orders over $250*

*Only apply to orders weight 1kg or less.

Foredom PowerGraver Handpiece, H.9D, (US fitting Type) (Supplied from Foredom USA)

The H.9D handpiece with palm rest works and feels like a hand engraving tool with the added advantages of greater control and the ability to adjust the impact force. It is a collet type handpiece with a special quick disconnect that fits ONLY the M.PGX PowerGraver motor sheath. The H.9D comes with 1/16″, 3/32″, 1/8″ and 3mm collets and has impact adjusting ring that changes the impact force.

 

The H.9D handpiece will NOT connect to a standard key tip shaft.

Stock # Item Price Order QTY
FD-H-9D Foredom PowerGraver Handpiece, H.9D, (US fitting Type) (Supplied from Foredom USA)

Foredom Chisel Handpiece, H.50, (US fitting Type) (Supplied from Foredom USA)

No Chisels included.

Foredom’s Chisel Handpiece is for carving in all types of wood, plastic, plaster, and soft carving stone. It connects to a key tip quick disconnect flexible shaft which can be powered by an M.SR, M.TX, M.LX flex shaft motor, or another motor that can power a key tip quick disconnect flexible shaft (a Flexade can also be used!). Itis a reciprocating ‘hammer’ type handpiece that requires light pressure to start the hammering chisel action. It has a stroke length of 1/8″ (3.2mm). It has a rugged textured plastic barrel & tapered aluminum front end.
MUST BE USED IN FORWARD MOTOR DIRECTION ONLY – if you use a motor that can go in reverse.
TIP: We recommend using this handpiece with Series TX and LX or Series SR motors in forward rotation only.

For optimum performance use between 1,000 – 8,000 RPM.
TIP: We also recommend using a dial speed control, in place of a foot pedal, to run steady within the recommended lower end of the speed range. Carvers can set and maintain any desired speed when connected to a dial control. See Kits K.EM-50 and K.EMX-50.

Stock # Item Price Order QTY
FD-H-50 Foredom Chisel Handpiece, H.50, (US fitting Type) (Supplied from Foredom USA)

H.30SJ Chuck-Style Handpiece, Slip Joint (Australian fitting European Type) (Supplied from Foredom USA)

3-jaw chuck with 0-4mm capacity. Fits European flex shafts or Foredom with slip joint shafting.

Stock # Item Price Order QTY
FD-H-30SJ H.30SJ Chuck-Style Handpiece, Slip Joint (Australian fitting European Type) (Supplied from Foredom USA)

Foredom Handpiece, H.20, Quick Change, Slip Joint (Australian fitting US Type) (Supplied from Foredom USA)

The H.20 is for use ONLY with 3/32″ (2.35mm) shank burs. A lever action on the handpiece body is all that is required to change accessories. It has a molded plastic front grip with tapered sides for easy and close handling, plus pre-lubricated ball bearings that do not require additional lubrication. The collet in this handpiece can be replaced and/or adjusted if the hold on a bur shank is not secure. Watch the video for instructions on making collet adjustments.
5-5/8″ long, 1-1/8″ dia. (center), 3/8″ dia. (front taper), wt. 4 oz., ship wt. 4.75 oz.

H.20 is a standard key tip handpiece.

Stock # Item Price Order QTY
FD-H-20 Foredom Handpiece, H.20, Quick Change, Slip Joint (Australian fitting US Type) (Supplied from Foredom USA)

H.15 Handpiece, Hammer (US fitting) (Supplied from Foredom USA)

The H.15 Handpiece has hammering rather than rotary action for use at low speed (0-5,000 rpm) by jewelers for stone setting and decorative work. Comes with an anvil point (HP10177). It requires periodic lubrication.

Hammer has 1/32″ stroke and its impact can be adjusted from light to heavy by turning the silver knurled adjusting ring. Optional points are available: 6 different shaped Anvil Points (HP10171, HP10172, HP10173, HP10175, HP10176 and HP10179); Pave Point (R15PT), and Stylus with Carbide Tip (HP10212). 6-1/4″ long, 1/4″ dia. at tip, wt. 3.65 oz., ship wt. 4.85 oz. 

Stock # Item Price Order QTY
FD-H-15 Foredom Handpiece, H.15 Hammer, (US fitting ) (Supplied from Foredom USA)

Foredom 6-PC Stone Setting & Engraving Kit For Hand-piece, H.9D

Stock # Item Price Order QTY
FD-AK290 Foredom 6-PC Stone Setting & Engraving Kit For Handpiece, H.9D PowerGraver (Supplied from Foredom USA)

Gravers for PowerGraver H.9D hand-piece. (Choice of 4 different gravers)

Choose from 4 different shapes:

A-G91 Graver, GRS #52 Round : 2-3/16″ long x 1/4″ wide x 3/32″ thick (at thickest spot)
A-G92 Graver, GRS #3 Onglette : 2-1/8″ long x 1/4″ wide x 3/32″ thick (at thickest spot)
A-G93 Graver, GRS #2 Bevel : 2-3/16″ long x 1/4″ wide x 3/32″ thick (at thickest spot)
A-G94 Graver, GRS #40 Flat : 2-3/16″ long x 1/4″ wide x 3/32″ thick (at thickest spot)

Stock # Item Price Order QTY
FD-A-G91 Foredom Graver, GRS #52 Round For Handpiece, H.9D PowerGraver (Supplied from Foredom USA)
FD-A-G92 Foredom Graver, GRS #3 Onglette For Handpiece, H.9D PowerGraver (Supplied from Foredom USA)
FD-A-G93 Foredom Graver, GRS #2 Bevel For Handpiece, H.9D PowerGraver (Supplied from Foredom USA)
FD-A-G94 Foredom Graver, GRS #40 Flat For Handpiece, H.9D PowerGraver (Supplied from Foredom USA)

Theadred For Handpeice (Supplied by Foredom USA)

Stock # Item Price Order QTY
FD-HP10171 Foredom Ball Nose, Threaded For Handpiece, H.15SJ Hammer , (Supplied from Foredom USA)
FD-HP10172 Foredom Fine Point, Threaded For Handpiece, H.15SJ Hammer , (Supplied from Foredom USA)
FD-HP10173 Foredom Square, Threaded For Handpiece, H.15SJ Hammer , (Supplied from Foredom USA)
FD-HP10175 Foredom Cylinder, Threaded For Handpiece, H.15SJ Hammer , (Supplied from Foredom USA)
FD-HP10177 Foredom Anvil Point, Threaded For Handpiece H.15SJ Hammer
FD-HP10177P Foredom Anvil Point, No Thread For Handpiece, H.9D PowerGraver, (Supplied from Foredom USA)
FD-HP10179 Foredom Bezel Rocker, Threaded For Handpiece, H.15SJ Hammer , (Supplied from Foredom USA)

Foredom LED Light Bar (Supplied by Foredom USA)

31-1/2″ long pivoting LED Light Bar with shade illuminates the entire work surface. For 115V or 230V use.
Component of the Foredom Work Bench System. (Supplied by Foredom USA)

Stock # Item Price Order QTY
FD-MALB-1-26 Foredom LED Light Bar (Supplied from Foredom USA)

Foredom 42-pc Flex Shaft Kit (Supplied by Foredom USA)


This kit contains:(Supplied by Foredom USA)

  • 1 x Platinum White Compound, 25.4mm (1?) (A-40061)
  • 6 x Pink Radial Bristle Disc, 19.05mm (3/4?) diameter, Pumice - 1,200 Grit (A-4516)
  • 3 x Purple Ceramic Sanding Bands, 6.35mm x 12.70mm (1/4?x 1/2?), 60 grit (A-4912)
  • 3 x Purple Ceramic Sanding Bands, 6.35mm x 12.70mm (1/4?x 1/2?), 80 grit (A-4913)
  • 3 x Purple Ceramic Sanding Bands, 6.35mm x 12.70mm (1/4?x 1/2?), 120 grit (A-4914)
  • 3 x Purple Ceramic Sanding Bands, 6.35mm x 12.70mm (1/4?x 1/2?), 220 grit (A-4916)
  • 1 x Satin Finisher Red, Fine, 22.23mm (7/8?) diameter x 6.35mm (1/4?) thick, Mounted; 2.35mm Shank (A-5517)
  • 1 x Satin Finisher, Tan, Coarse, 22.23mm (7/8?) diameter x 6.35mm (1/4?) thick, Mounted; 2.35mm Shank (A-5524)
  • 1 x Rubber Bonded Abrasive, Wheel, 22.23mm (7/8?) diameter x 3.18mm (1/8?) thick, 1.59mm Arbor Hole, Coarse, 40-60 Grit (A-A1C)
  • 1 x Rubber Bonded Abrasive Wheel, 22.23mm x 3.18mm, 120 grit (A-A1M)
  • 1 x Rubber Bonded Abrasive Wheel, 22.23mm x 3.18mm, 180 grit (A-A1F)
  • 1 x Satin Finisher, White, Extra Fine, 25.4mm (1?) diameter x 6.35mm (1/4?) thick, Mounted; 2.35mm Shank (A-5523)
  • 1 x Fine Muslin Buff, Loose No Stitching, 25.4mm (1?) diameter x 6.35mm (1/4?) thick, Mounted; 2.35mm Shank (A-5520)
  • 1 x Unitized Mounted Point, Taper, 9.53mm (3/8?) x 19.05mm (3/4?), Medium Grit, Hard Density, 2.35mm Shank (A-5595)
  • 1 x Cut Off Disc, Fiberglass, 90 grit, 31.75mm (A-D2)
  • 1 x Felt Buff, Unmounted, 15.88mm (A-FB4-I)
  • 1 x Mandrel, Screw, 2.35mm Shank & 1.59mm arbor hole (A-M1)
  • 1 x Mandrel, Screw, Large Head, 2.35mm Shank & 1.59mm arbor hole (A-M13)
  • 1 x Brush, Mounted, Cup, Bristle, 2.35mm Shank (A-MB1)
  • 1 x Brush, Mounted, Wheel, Bristle, 2.35mm Shank (A-MB2)
  • 1 x Brush, Mounted, Wheel, Bristle, 3.18mm Shank (A-MB3)
  • 1 x Brush, Mounted, End, Brass, 2.35mm Shank (A-MB4)
  • 1 x Brush, Mounted, Wheel, Brass, 2.35mm Shank (A-MB6)
  • 1 x Engraving Bur, Inverted Cone, 0.79mm, 2.35mm Shank (A-P3)
  • 1 x Engraving Bur, Inverted Cone, 2.35mm, 2.35mm Shank (A-P7)
  • 1 x Engraving Bur, Ball, 0.79mm, 2.35mm Shank (A-R2)
  • 1 x Engraving Bur, Ball, 2.35mm, 2.35mm Shank (A-R7)
  • 1 x Rubber Sanding Drum Mandrel, 6.35mm (1/4?) x 12.70mm (1/2?), 2.35mm Shank (A-SD324)
  • 1 x V Stone Point, Cylinder, 6.35mm (1/4?) diameter x 12.70mm (1/2?) long, 2.35mm Shank, 80 Grit (A-V357)
  • 1 x Rotating Bur Holder 2.35mm (A-10081)
Stock # Item Price Order QTY
FD-AK11 Foredom 42-pc Flex Shaft Kit (Supplied from Foredom USA)
X