Contact Us

22 Heussler Terrace
Milton QLD 4064
Get Directions

[email protected]

Adelaide: (08) 7221 2202
Melbourne: (03) 9038 8545
Perth: (08) 6363 5517
Sydney: (02) 8004 1626

Free Shipping Ozwide on orders over $250*

*Only apply to orders weight 1kg or less.

EVEFLEX Twist Silicon carbide rubber polishers & pins

These EVEFLEX TWIST silicon carbide rubber polishers are radial polishing discs for use on precious and non-precious metals, alloys, and glass. For material removal, shaping, smoothing, creating a matt finish and polishing to a high lustre finish. 

  • 17mm x 1.6mm
  • Ideal for highly detailed areas of work. Work your way down through the grades until you have reached the desired effect or surface finish you require. 
Stock # Item Price Order QTY
T-CXE4342 EVEFLEX Pins, 2x20mm MEDIUM, brown Price Per Pack of 5
T-CXE4352 EVEFLEX Pins, 2x20mm X-COARSE, blue Price Per Pack of 5
T-CXE4353 EVEFLEX Pins, 3x23mm X-COARSE, blue Price Per Pack of 5
T-CXE4657 EVEFLEX TWIST GREY/COARSE #600 MOUNTED , Price Per Pack of 3
T-CXE4757 EVEFLEX TWIST SOFT-PRE Brown/medium # 700 POLISHED MOUNTED , Price Per Pack of 3
T-CXE4957 EVEFLEX TWIST X-FINE/VERY SOFT Green #900 MOUNTED , Price Per Pack of 3

Foredom PowerGraver Handpiece, H.9D, (US fitting Type) (Supplied from Foredom USA)

The H.9D handpiece with palm rest works and feels like a hand engraving tool with the added advantages of greater control and the ability to adjust the impact force. It is a collet type handpiece with a special quick disconnect that fits ONLY the M.PGX PowerGraver motor sheath. The H.9D comes with 1/16″, 3/32″, 1/8″ and 3mm collets and has impact adjusting ring that changes the impact force.

 

The H.9D handpiece will NOT connect to a standard key tip shaft.

Stock # Item Price Order QTY
FD-H-9D Foredom PowerGraver Handpiece, H.9D, (US fitting Type) (Supplied from Foredom USA)

Foredom Chisel Handpiece, H.50, (US fitting Type) (Supplied from Foredom USA)

No Chisels included.

Foredom’s Chisel Handpiece is for carving in all types of wood, plastic, plaster, and soft carving stone. It connects to a key tip quick disconnect flexible shaft which can be powered by an M.SR, M.TX, M.LX flex shaft motor, or another motor that can power a key tip quick disconnect flexible shaft (a Flexade can also be used!). Itis a reciprocating ‘hammer’ type handpiece that requires light pressure to start the hammering chisel action. It has a stroke length of 1/8″ (3.2mm). It has a rugged textured plastic barrel & tapered aluminum front end.
MUST BE USED IN FORWARD MOTOR DIRECTION ONLY – if you use a motor that can go in reverse.
TIP: We recommend using this handpiece with Series TX and LX or Series SR motors in forward rotation only.

For optimum performance use between 1,000 – 8,000 RPM.
TIP: We also recommend using a dial speed control, in place of a foot pedal, to run steady within the recommended lower end of the speed range. Carvers can set and maintain any desired speed when connected to a dial control. See Kits K.EM-50 and K.EMX-50.

Stock # Item Price Order QTY
FD-H-50 Foredom Chisel Handpiece, H.50, (US fitting Type) (Supplied from Foredom USA)

H.30SJ Chuck-Style Handpiece, Slip Joint (Australian fitting European Type) (Supplied from Foredom USA)

3-jaw chuck with 0-4mm capacity. Fits European flex shafts or Foredom with slip joint shafting.

Stock # Item Price Order QTY
FD-H-30SJ H.30SJ Chuck-Style Handpiece, Slip Joint (Australian fitting European Type) (Supplied from Foredom USA)

Foredom Handpiece, H.20, Quick Change, Slip Joint (Australian fitting US Type) (Supplied from Foredom USA)

The H.20 is for use ONLY with 3/32″ (2.35mm) shank burs. A lever action on the handpiece body is all that is required to change accessories. It has a molded plastic front grip with tapered sides for easy and close handling, plus pre-lubricated ball bearings that do not require additional lubrication. The collet in this handpiece can be replaced and/or adjusted if the hold on a bur shank is not secure. Watch the video for instructions on making collet adjustments.
5-5/8″ long, 1-1/8″ dia. (center), 3/8″ dia. (front taper), wt. 4 oz., ship wt. 4.75 oz.

H.20 is a standard key tip handpiece.

Stock # Item Price Order QTY
FD-H-20 Foredom Handpiece, H.20, Quick Change, Slip Joint (Australian fitting US Type) (Supplied from Foredom USA)

H.15 Handpiece, Hammer (US fitting) (Supplied from Foredom USA)

The H.15 Handpiece has hammering rather than rotary action for use at low speed (0-5,000 rpm) by jewelers for stone setting and decorative work. Comes with an anvil point (HP10177). It requires periodic lubrication.

Hammer has 1/32″ stroke and its impact can be adjusted from light to heavy by turning the silver knurled adjusting ring. Optional points are available: 6 different shaped Anvil Points (HP10171, HP10172, HP10173, HP10175, HP10176 and HP10179); Pave Point (R15PT), and Stylus with Carbide Tip (HP10212). 6-1/4″ long, 1/4″ dia. at tip, wt. 3.65 oz., ship wt. 4.85 oz. 

Stock # Item Price Order QTY
FD-H-15 Foredom Handpiece, H.15 Hammer, (US fitting ) (Supplied from Foredom USA)

Foredom Micromotor Kit, Brush Type, 3/32" 230V Aus (Supplied by Foredom USA)

For high speed applications up to 38,000 rpm including light deburring of cast pieces, bright cutting in jewelry making and fine detailing in wood. Kit includes control box, handpiece with 2.35mm (3/32") collet, variable speed foot control, handpiece cradle, spare pair of motor brushes, spare fuse and collet changing wrenches. The control converts AC current to DC current required for the handpiece. 

Compared to flexible shaft machines, micromotors have less torque, however, their higher speed results in a comparable rate of material removal with a lighter touch. The cord connection between the handpiece motor and control box offers greater freedom of movement that you have with a flexible shaft machine.

Kit includes:

  • HP4-917 Control Box
  • H.MH-170 Handpiece with 2.35mm (3/32″) Collet
  • HP4-960 Variable Speed Foot Control
  • HP4-933 Handpiece Cradle
  • Spare pair of motor brushes, spare fuse, collet changing wrenches.
    (Supplied by Foredom USA)
Stock # Item Price Order QTY
FD-K-1070-26 Foredom Micromotor Kit, Brush Type, 3/32" 230V Aus (3.2KG)

Foredom Flexi Drive Kit with M.SR Motor & Flexible Shaft

PrePackaged Tool Kits contain just about everything you need to get to work- motor, speed control, handpiece and accessories. They take the guesswork out of product selection, offer the best value, and feature smart tool combinations for specific applications.

Stock # Item Price Order QTY
FD-K-2220-2 Foredom Flexi Drive Kit with M.SR Motor & flexible Shaft, C.FCH foot control and H.20 Handpiece Plus the AK11 42Pc Accessary kit. 230V Aus (5.5KG)

Foredom Flexi Drive Kit with M.SR Motor & Flexible Shaft (Supplied by Foredom USA)

Flex Shaft Tool Sets include a Motor, Speed Control, and Handpiece. (Supplied by Foredom USA)

H.20 Handpiece: preferred by some jewelers who make frequent bur changes, “quick change” handpiece is only for use with 3/32″ shank accessories. Features a tapered plastic front grip and sides for close handling. It has pre-lubricated ball bearings that never need lubrication. H.20 is a standard key tip handpiece.

Australian power adapater.

Stock # Item Price Order QTY
FD-K-8304-26 Foredom Flexi Drive Kit with M.SR Motor & Flexible Shaft (5.1KG)

Foredom Adapter, Slip Joint to Key Tip (Supplied by Foredom USA)

Connects a key tip handpiece with a slip joint flexible shaft connection. Also works with other tools with key tip connections, e.g. Kate Wolf’s Belt Sander. (Supplied by Foredom USA)

Stock # Item Price Order QTY
FD-HP771 Foredom Adapter, Slip Joint to Key tip
X