Buff, Compounds, Burrs & Drills

Foredom Chisel Handpiece, H.50, (US fitting Type) (Supplied from Foredom USA)

No Chisels included.

Foredom’s Chisel Handpiece is for carving in all types of wood, plastic, plaster, and soft carving stone. It connects to a key tip quick disconnect flexible shaft which can be powered by an M.SR, M.TX, M.LX flex shaft motor, or another motor that can power a key tip quick disconnect flexible shaft (a Flexade can also be used!). Itis a reciprocating ‘hammer’ type handpiece that requires light pressure to start the hammering chisel action. It has a stroke length of 1/8″ (3.2mm). It has a rugged textured plastic barrel & tapered aluminum front end.
MUST BE USED IN FORWARD MOTOR DIRECTION ONLY – if you use a motor that can go in reverse.
TIP: We recommend using this handpiece with Series TX and LX or Series SR motors in forward rotation only.

For optimum performance use between 1,000 – 8,000 RPM.
TIP: We also recommend using a dial speed control, in place of a foot pedal, to run steady within the recommended lower end of the speed range. Carvers can set and maintain any desired speed when connected to a dial control. See Kits K.EM-50 and K.EMX-50.